Menu
Super White Travertine offers a calm white base with gentle grey notes and a tidy, minimal texture. Cross-cut tiles show soft clouds; vein-cut pieces read as clean, parallel bands. Filled and honed surfaces keep glare low and joints neat, while brushed textures add warmth underfoot. As a travertine selection, the material suits interiors or mild, sheltered exteriors when details are correct. The sections below explain its makeup, structural behavior, available sizes, best uses, pricing drivers, production path, care steps, and supply options so specifications are clear from the start.
Reliable supply matters as much as appearance. JAM Stone Co. manages the chain from block choice to final packing, keeping batches consistent in tone, thickness, and finish. Inspections track flatness, edge quality, and shade grouping, and non-conforming pieces are removed before crating. Cut-to-size stair parts, wall panels, and vanity tops are produced to tight tolerances for quick installation. Export packing uses corner guards, foam sheets, and moisture barriers, with clear labels and photo logs for traceability. As a supplier of Super White Travertine, JAM Stone Co. supports schedules with responsive planning and timely shipping, helping teams reduce rework and avoid on-site surprises.
Super White Travertine is a selection grade of travertine, a porous limestone formed by mineral springs. The “Super White” label refers to a lighter base and a tighter, cleaner texture than standard whites. Mineral makeup is mainly calcite, with minor traces that may appear as faint beige or silver lines. Cross-cut panels display cloudy fields, while vein-cut slabs align the natural bands for a linear look. The stone accepts polished, honed, brushed, or tumbled finishes; interiors usually favor filled and honed surfaces for easy cleaning. As a calcitic stone, it is sensitive to acids and performs best indoors or in sheltered exterior locations.
Travertine forms with pores created by trapped gas, so texture and strength depend on how open those voids are and how the piece is cut. In Super White selections, visible holes are fewer and smaller, which supports a more uniform surface after filling and finishing. Mechanical behavior sits within typical travertine ranges: medium compressive strength (≈ 40–100 MPa), moderate flexural strength (≈ 6–15 MPa), and Mohs hardness ~ 3–4. Direction matters; pieces loaded across the bands may behave differently than those loaded along them. Resin filling and, when needed, fiberglass mesh on the back of slabs add stability for handling and reduce edge damage during fabrication and transport.
The stone is calcite-dominant, typically >90% CaCO₃. Minor clay or iron traces can appear as faint beige or silver wisps. Because porosity is natural in travertine, the Super White selection focuses on lighter tone and tighter texture to keep the surface cleaner after factory filling and finishing.
Base color sits in a white to off-white range with subtle grey or pale beige strands. Cross-cut pieces show relaxed clouds with soft transitions, while vein-cut panels present straight, parallel bands. Selection aims for consistent tone across lots so large floors and wall runs read as one field.
Bulk density typically falls near 2.30–2.55 g/cm³. Visible pores are reduced in this grade but remain part of the stone’s character. Water absorption by weight is commonly ~0.4–2.0% for dense travertines (per typical ASTM C97 results for the travertine family); factory fill and a breathable sealer help limit in-service uptake.
Mohs hardness ~3–4; compressive strength ≈ 40–100 MPa; flexural strength ≈ 6–15 MPa. Directionality and pore distribution influence results, so mock-ups or sample tests are wise for demanding details such as thin stair treads or narrow kerbs.
Occasional hairline seams, stylolites, and tiny clay wisps may occur. Selection limits the size and length of such features so surfaces finish flat and edges stay clean. Factory fill closes pinholes and voids to support tight joints and smooth transitions between tiles or adjacent materials.
The visual read is bright and orderly. Filled and honed finishes give a calm, low-glare surface that suits main floors and wall cladding, while brushed textures add tactile warmth without looking busy. Polished faces raise gloss and contrast but also highlight any micro-pitting, so placement should be considered. Color remains stable under daylight; the key weathering risks are water ingress and freeze–thaw cycling in cold climates. Because the stone is calcitic, acids will etch the surface; neutral-pH cleaners, good sealing practice, and prompt wipe-ups keep the finish sound in everyday use.
High light reflectance supports bright rooms with simple palettes. A honed surface reads between matte and satin, while a polished face reflects more and amplifies contrast. Translucency is not a design driver for this material. The value lies in clarity, comfort underfoot, and the ability to sit quietly beside wood or metal.
Honed feels smooth with tiny, closed pits after filling; it cleans easily. Brushed adds a fine relief that softens glare and improves barefoot comfort in bathrooms and spas. Tumbled edges can reduce visual weight at joints, creating a relaxed, traditional character without heavy patterning.
Tone holds under UV exposure, but the stone does not enjoy saturation and freeze–thaw cycling. Where winters are severe, use in sheltered areas with upgraded thickness, drainage, and movement joints. Avoid de-icing salts, which can mark natural stones and drive unwanted moisture into edges and joints.
Calcium carbonate reacts with acids, so lemon, vinegar, and harsh cleaners can etch. Use a breathable impregnating sealer and pH-neutral maintenance products. Specify coasters, trays, and prompt wipe-ups in kitchens and bars to keep the surface even and to avoid dull spots or rings.
Standard slabs are produced in 2 cm and 3 cm thicknesses. Typical slab dimensions sit in the 2.6–3.0 m × 1.6–1.9 m range, depending on the block. Tiles are commonly supplied at 300×600, 600×600, and 600×1200 mm in 10–20 mm thicknesses. Cut-to-size for stair treads, risers, wall panels, and vanity tops is routine with tight tolerances. Outdoor pavers are usually thicker, around 30–50 mm, and finished brushed or tumbled for comfort and grip. Mosaics and skirting pieces are available to complete transitions and details.
2 cm and 3 cm stock, trimmed and calibrated. Where structure needs it, slabs receive resin and a light fiberglass mesh on the back to improve handling and reduce edge chipping during transport and fabrication. Shade grouping is maintained so adjoining pieces align in tone and pattern across large surfaces.
Standard modules include 300×600, 600×600, and 600×1200 mm in 10–20 mm thicknesses. Most interiors use filled and honed tiles for easy cleaning and neat joints, with micro-bevels to protect edges during service and maintenance.
Stair treads, risers, wall panels, thresholds, and vanity tops are fabricated to project dimensions. Edges can be eased, chamfered, or profiled as needed. Tolerances support narrow joints and clean alignment with metal trims, wood skirting, or adjoining stone finishes in the same space.
Mesh-mounted sheets, such as 23×23 or 48×48 mm, provide flexibility for showers and curves. Linear or hex patterns can blend with field tiles while improving slip comfort and making drainage easier in wet zones like spa benches and shower floors.
For outdoors, thicker pieces between 30–50 mm are common. Brushed or tumbled textures improve traction, and open joints over suitable bedding allow water to move away from the surface, which is preferable in mild climates and sheltered areas.
Matching skirting at 70–120 mm, plus step nosings and transition trims, complete details. Consistent tone and finish keep lines neat at the perimeter and help protect wall paint from cleaning water on busy floors and corridors.
Super White Travertine suits interiors where light control, simple lines, and calm color are important. Filled and honed floors handle daily traffic in homes, hotels, and retail when joints, movement gaps, and substrates are designed well. Wall panels, reception desks, fireplace surrounds, stair parts, and bathroom cladding benefit from the stone’s clean read. Kitchen worktops are possible with disciplined care (sealing, pH-neutral cleaning, use of trivets/coasters), but expect patina. Exterior use should focus on mild climates or sheltered areas with good drainage, appropriate movement joints, upgraded thickness, and textured finishes for comfort and grip.
Pricing depends on selection grade, block size and yield, processing quality, finish type, thickness, format complexity, and logistics. Super White grades command a premium for lighter tone and tighter texture, which reduce visible filling and support uniform fields on large jobs. Efficient nesting during cutting and accurate shade grouping also lower waste and rework. Transport distance, crate design, and delivery schedules affect the landed cost. Clear specifications for finish, sealing, and edge work help factories plan correctly, avoid changes on the line, and keep total project cost predictable from sampling through installation and handover.
Whiter base, fewer visible pores, and consistent pattern raise value because they deliver cleaner surfaces after filling and reduce visual variation across rooms, lobbies, or long corridors where continuity is a key design aim in interior schemes.
Large, sound blocks improve the ratio of usable slab area to waste. Better yield reduces unit cost, simplifies shade grouping, and allows longer runs of vein-matched or tone-matched panels without patchwork effects across adjacent elevations or floors.
Flatness, thickness tolerance, and edge integrity control installation speed and joint quality. Higher precision reduces lippage and grinding on site, limits breakage, and makes maintenance easier because mops and pads travel smoothly across the surface without catching on proud edges.
Polished, honed, brushed, or tumbled surfaces require different abrasives, labor, and inspection. Projects that include multiple finishes or pre-sealing steps add time and consumables, which can move the unit price even when the base stone grade stays the same between lots.
Thin calibrated tiles cost less per square meter than thick pavers or oversized panels. Special edge profiles for stair nosings or vanity details add precise machining steps that must be planned, protected during packing, and handled with care during installation.
Distance to site, crate design, and loading plans affect the landed cost. Reliable stock positions and realistic lead times avoid air freight or split shipments, keeping budgets on track and reducing risk for schedules that cannot absorb delays or re-selection efforts.
Production begins with bench extraction and careful block selection for tone and structure. Blocks are trimmed and slabbed, then resin-treated and, where needed, backed with a light mesh to stabilize veined zones. After curing, slabs are calibrated, honed or polished, and cut to size. Quality checks cover thickness, flatness, and shade grouping; non-conforming pieces are removed. Labels, batch codes, and photo logs support traceability. Crates and A-frames use foam, corner guards, and moisture wraps, and containers are loaded to balance weight and minimize movement so material reaches site ready for dry layout and installation.
Prepare flat, dry substrates and use suitable cementitious or polymer-modified adhesives as specified. Set calibrated tiles with 2–3 mm joints and respect movement gaps. After installation, apply a breathable impregnating sealer and follow a regular care cycle based on traffic. Use pH-neutral cleaners; avoid acids and harsh solvents. Protect with mats and felt pads; wipe spills promptly, especially in kitchens and bars. In wet zones, ensure correct slopes and ventilation. For exterior use, manage drainage, avoid standing water and de-icing salts, and select thicker, textured pieces to improve safety and long-term surface quality.
JAM Stone Co. coordinates quarry access, block selection, processing, and export logistics for Super White Travertine. Modern lines handle calibration, honing, polishing, brushing, and edge work with consistent results. Project support includes representative samples, finish matching, mock-ups, and documentation to speed approvals. In-process inspections check thickness, flatness, and edge quality, while shade grouping keeps large surfaces coherent. Packing is designed for long travel and easy receiving on site. As a provider of Super White Travertine, the company focuses on clear communication and predictable lead times so teams can plan sequencing, dry layouts, and installation without avoidable stops.
Reliable delivery depends on a disciplined process. JAM Stone Co. applies multi-stage inspections, from block intake to final crate checks, to keep batches aligned in tone and finish. Dimensional tolerances are tight, and edges arrive ready for narrow joints. Cut-to-size programs cover stairs, wall panels, and tops with precise labeling for quick installation. Export documents and packing photos support traceability at every step. As an experienced exporter of Super White Travertine, the company plans container loads carefully, balances weight, and protects surfaces so material reaches the site in sound condition and projects keep moving on schedule.
Supply strength begins at the source. JAM Stone Co. maintains long-term relationships in key travertine belts and prioritizes benches with light beds and sound structure. Direct access to reliable reserves supports consistent tone and predictable block sizes, which simplifies later matching of slabs and tiles on large jobs. Selective extraction reduces waste and protects the white base from contaminated contacts. Close coordination between quarry teams and the factory shortens feedback loops, so cutting plans and selection rules can be adjusted quickly to meet project requirements without disrupting overall availability.
Packing protects both the surface and the schedule. Foam sheets separate faces, corner guards protect edges, and moisture-resistant wraps keep crates safe during transit and storage. Fumigated wooden crates or A-frames are locked with cross-bracing and shock indicators. Labels show batch, thickness, finish, and shade group, with matching packing lists and photo logs. Loads are balanced inside containers to limit movement and simplify unloading. These measures reduce breakage, speed receiving on site, and help installation teams start dry layouts with clear, accurate information at the pallet and crate level.
Super White Travertine
a renowned Iranian brand, has been a staple in building facades for numerous years, prized for its cream, beige, and chocolate tones. Distinguished by its lower porosity compared to other travertines, this stone boasts exceptional polishability and compressive strength.
Address: No. 1014, JAM Center, Jamaran St., Niavaran, Tehran, Iran – 1977763988
Email: info@jamstoneco.com
