Menu
Walnut Travertine makes rooms feel calm the moment you step inside. Its grounded brown tones and quiet patterning set an easy rhythm: vein-cut slabs show straight bands for a clean, linear look, while cross-cut tiles display soft clouds for a relaxed flow. Factory filling closes surface pores and helps with cleaning, and honed or brushed finishes keep reflection low and comfortable underfoot. The stone pairs well with wood and dark metal, so it complements both modern and classic schemes. This article explains how the material behaves from structure to maintenance and points to the best uses where its strengths deliver reliable, long-term performance.
When outcomes matter, process beats luck. Reliable projects depend on consistent sourcing, careful grading, and steady finishing. JAM Stone Co. works with established quarries, inspects blocks for soundness, and applies vacuum resin with back mesh where needed. Calibrated thickness helps installers achieve flat, tight joints on large areas. Quality control checks thickness, fill integrity, and edge finish at every stage, then moves to moisture-safe packing and clear labeling. Coordinated logistics and responsive after-sales support complete the chain, giving buyers confidence that delivered lots match the approved samples and project schedule.
Walnut Travertine is a warm brown travertine, a type of limestone formed by mineral-rich hot springs. The “walnut” name refers to the tan-to-cocoa spectrum created by iron oxides and organic traces. Vein-cut slabs show parallel bands; cross-cut tiles display cloudy movement. Natural voids are typical, so commercial material is often resin-filled before finishing. Honed and brushed textures are common for floors and walls; tumbled surfaces suit rustic features. With planned build-ups and correct finishes, exterior use is possible in mild climates. The stone is supplied as slabs, tiles, pavers, mosaics, and custom cut-to-size parts.
Travertine has an open-pore fabric with layered bands. Sound blocks, resin fill, and mesh reinforcement improve cohesion before honing or polishing. After calibration, 20–30 mm slabs show good flatness for interior work. Because this is a calcite stone, hardness is modest, so finish choice and maintenance matter in busy areas. Typical family values include bulk density around 2.40–2.55 g/cm³ and open porosity that is reduced at the face after filling. For exterior or load-bearing applications, project-specific testing to relevant standards is recommended, especially in freeze-thaw climates or where slip resistance is critical.
Walnut Travertine is predominantly calcium carbonate (calcite) with minor aragonite. Brown tone arises from iron oxides and organic traces within growth layers. Bands reflect deposition in flowing water, while stylolites and thin clay seams can occur. The pore network ranges from pinholes to elongated tubes. These features guide grading, filling strategy, and expected finish results across different benches within a quarry.
The base spans tan, chestnut, and cocoa. Vein-cut pieces show continuous linear ribbons with tonal steps, useful for directional design. Cross-cut stock creates soft clouds and patches for a calmer field. Occasional light calcite threads can brighten panels. Producers often sort “quiet” lots for uniform floors and “character” lots for accent walls, allowing designers to control visual rhythm across rooms.
Raw travertine shows significant open porosity, commonly in the 10–25% range. Factory filling reduces surface-connected voids, improving cleanliness and grout control. After filling and finishing, water absorption by weight often falls around 0.6–2.2% for commercial material. These values are typical of the travertine family and help plan sealing cycles, substrate choice, and joint design for interior and exterior applications.
As a calcite stone, Mohs hardness is about 3. Typical compressive strength for commercial travertine falls roughly between 60–110 MPa, with flexural strength for 20 mm slabs around 8–12 MPa. Abrasion resistance is moderate; honed or brushed finishes serve medium-traffic floors well. For outdoor paths, tumbled or bush-hammered textures provide extra grip. Proper support and movement joints protect edges under rolling loads.
Expect pores, stylolites, and occasional clay seams as inherent features. Reputable processing bridges micro-fissures with resin and limits hole size at the face. Calibration and light arrising reduce edge chipping during handling. Visible iron spots may appear in some lots and should be addressed through selection. Clear grading rules keep aesthetic variation within agreed limits for large, coordinated areas.
Walnut Travertine reads warm and grounded, making spaces feel composed without visual noise. Honed and brushed finishes scatter light gently, while polished faces boost contrast but can accentuate etches and slips, so they are used mainly on walls. Filled surfaces clean easily; open-pore textures look rustic but need more care. Outdoors, select non-polished textures and ensure drainage. As a calcite stone, it etches with acids; sealing reduces stains but does not stop etching. Color holds well in sunlight; the main risk is water cycling in cold climates, which you mitigate with slope, drainage, and periodic maintenance.
Mid-brown tones anchor interiors and complement wood, black metals, and concrete. Vein-cut stripes add order; cross-cut clouds soften the field. Polished faces show higher contrast; honed and brushed keep glare low. Travertine is not translucent like onyx, so backlighting is uncommon. A matched selection across rooms gives coherent tone, especially where natural light changes through the day.
Honed feels smooth and comfortable underfoot. Brushed introduces a fine relief that improves traction while keeping a pleasant feel. Tumbled edges soften transitions and suit traditional or outdoor looks. After brushing, micro-pitting adds tactility without harshness. Indoors, the stone feels naturally cool to the touch, which pairs well with radiant heat systems under suitable build-ups and adhesives.
Browns are stable under UV, so fading is minor. The main concerns are moisture uptake and freeze-thaw cycling that can stress edges and fills. Avoid polished finishes outdoors; prefer brushed, tumbled, or bush-hammered textures. Plan drainage, slope, and breathable sealers. De-icing salts can mark calcite stones, so choose alternatives and schedule seasonal cleaning with neutral-pH products.
Being calcium carbonate, the stone reacts with acids like lemon, vinegar, and wine, which can leave matte etch marks. Penetrating sealers help limit stains but do not prevent etching. Use neutral-pH cleaners and soft pads. Avoid bleach, strong alkalis, and abrasive powders. For oils, a suitable poultice can lift the stain; etched areas may need professional honing to restore uniform sheen.
Commercial supply includes calibrated slabs in 20 and 30 mm, modular tiles, pavers, mosaics, and custom cut-to-size parts. Typical raw slab spans around 240–300 by 140–190 cm, depending on bench soundness and quarry practice. Tiles follow common modules for easy layout. Exterior pavers require thicker sections and non-polished textures to manage traction and weathering. Skirting and trims match field tiles for a finished look. Blocks are available for special fabrication, with vein direction considered during cutting to keep visual alignment across assembled parts.
Standard thicknesses are 20 and 30 mm. Many lots receive vacuum resin and back mesh to stabilize open areas before finishing. After kiln-drying, calibration controls tolerance so fabricators can meet tight joints. Typical slab sizes fall within commercial ranges that suit book-matching for walls and efficient nesting for counters, steps, and panels on mid-scale projects.
Common modules include 300×600, 600×600, 400×800, and 300×300 mm. Thickness is usually 10–20 mm, selected by traffic and substrate. Edges may be sawn or lightly bevelled for cleaner lines. Cross-cut tiles give a uniform field for large floors, while vein-cut tiles can run in a single direction to guide the eye through corridors and lobbies.
Fabricated parts include treads, risers, skirtings, wall panels, and vanity tops. Designers often align vein direction on stairs and wall runs for visual order. Typical thicknesses are 20 or 30 mm, with heavier sections for structural or long-span pieces. Arrised edges reduce chipping risk during install and daily use, improving long-term appearance in busy areas.
Mesh-mounted formats such as 23×23, 48×48, and 100×100 mm suit feature walls and shower floors. Strips, chevrons, and hexagons are also available. Extra sealing helps with grout cleanup on textured sheets. Because mosaics introduce many joints, they can increase traction where water is present while keeping the warm tone that anchors the wider design scheme.
Outdoor pavers are commonly 30–50 mm thick with tumbled or bush-hammered textures for grip. Installation over a draining bed with suitable jointing reduces water cycling in cold seasons. Borders and copings can be cut to match, helping terraces, garden paths, and pool surrounds read as one coordinated system from edge to field.
Skirting typically uses 20 mm stock at 60–120 mm height with eased or arrised top edges. Matching finish and tone provide a neat termination for wall-to-floor junctions and protect plaster from cleaning equipment. Coordinated pieces keep the visual language consistent around columns, alcoves, and door returns, supporting a tidy, professional finish.
Nominal block sizes around 250×160×100 cm are common, though dimensions vary by bench and extraction plan. Selection considers vein direction, band spacing, and absence of major seams. Larger, sound blocks improve saw plans and yields, reducing off-cuts and enabling bigger continuous panels for lobbies and statement walls where alignment matters.
Walnut Travertine works well for interior floors, wall cladding, bathrooms, lobbies, stair parts, and fireplace surrounds. Honed and brushed finishes balance traction and cleanability in living spaces and light-commercial zones. On counters and vanities, sealing and basic care keep staining in check, while trays or mats help avoid acidic spills. Exterior use is feasible in mild climates when thickness, texture, drainage, and movement joints are designed correctly. Polished surfaces are best reserved for walls. Spaces that need calm, neutral warmth—boutiques, hotels, galleries, and homes—benefit from its steady tone and quiet pattern.
Costs vary with quarry bench, grade, and processing discipline, so a fixed number is not meaningful. Block integrity drives slab yield and waste, while thickness and oversize formats add handling and finishing time. Specialty textures and deep brushing add passes on the line. Logistics, crating efficiency, and destination also affect landed cost. Batch consistency reduces on-site rework, which saves time and money. The most accurate path is to define finish, formats, and quantities up front, then request a lot-specific quotation aligned with the project schedule and installation method.
Pricing reflects color uniformity, vein harmony, and pore size at the face. “Quiet” lots for large, uniform floors command different pricing than “character” lots for accent walls. Clear grading rules reduce surprises and improve on-site selection speed, helping crews maintain momentum and consistent results.
Larger blocks enable efficient cutting plans and higher usable area per ton. Better yield reduces off-cut waste, crane moves, and re-nesting in fabrication. These factors improve overall value and help timelines, especially on projects with many repeated parts like treads, risers, and wall panels.
Vacuum resin quality, back mesh where required, and tight calibration tolerances improve installation speed and appearance. Flat, well-filled slabs reduce lippage and patching on site. Consistent finishes across batches support clean transitions between rooms, minimizing rework and protecting schedules.
Honed and brushed require fewer steps than deep textures or heavy bush-hammering, which add time. Polished faces need more refinement and inspection. Specialty fills or custom surface treatments add passes on the line, influencing throughput and unit cost for each delivered square meter.
Thicker sections like 30 mm slabs and oversize panels increase material, handling, and polishing effort. Tight tolerances for book-matched walls or large stair runs add inspection time. These choices are often design-driven; acknowledging them early keeps budgets aligned with performance goals.
Proximity to port, crate optimization, and steady quarry output influence lead times and freight per square meter. Seasonal demand and regional projects can tighten supply. Early reservations and clear packing lists help secure consistent batches and reduce breakage risk during global transit.
Extraction begins with diamond-wire cutting to open benches and free blocks with minimal shock. On the yard, blocks are graded for color, banding, and integrity before heading to the factory. Slabs are cut on multi-wire or gangsaws, dried, resin-filled, with back mesh applied as needed, and calibrated to thickness. Finishes—honed, brushed, tumbled, bush-hammered, or polished—are applied per order. Final checks confirm flatness, fill quality, and edge finish. Labeled tiles and slabs are packed with foam separators and moisture-resistant wrap, then loaded in optimized crates to control breakage and freight.
Use a deformable, cementitious adhesive rated C2TE/S1 and follow substrate preparation rules. Indoors, 2–4 mm grout joints help manage movement and cleanup. Apply a penetrating sealer after install and re-seal on a schedule based on traffic. Clean with neutral-pH products; avoid vinegar, bleach, or abrasive powders. Wipe acidic spills quickly to limit etching. Outdoors, ensure slope and drainage, and avoid de-icing salts. Felt pads under furniture reduce scratching. For oils, use a suitable poultice; for etch marks, light honing or professional refinishing restores an even sheen across the surface.
JAM Stone Co. manages the value chain from quarry selection to finished delivery. Long-term relationships with reputable Iranian travertine belts provide steady access to benches with stable walnut tones. Modern lines handle drying, vacuum resin, mesh reinforcement, and calibrated honing or brushing. In-house checks monitor thickness, flatness, and fill integrity. Batch coordination keeps color and vein direction consistent across rooms. As a provider of Walnut Travertine, the company focuses on dependable, repeatable outcomes so designers and contractors can plan confidently and keep site work on schedule.
Global buyers value predictable service as much as attractive stone. JAM Stone Co. conducts multi-stage inspections covering visual grade, thickness, flatness, and edges, with corrective actions documented along the line. Compliance with common international expectations and clear packing lists support smooth customs handling. Minimum-order flexibility serves boutique jobs and large projects alike. Coordinated logistics and responsive updates help keep shipping on track. As a supplier of Walnut Travertine, the company also offers client-specific cutting, vein matching, and labeled sets that simplify installation and reduce on-site decision time.
Supply draws on established brown-travertine reserves within central Iranian corridors known for consistent walnut hues and workable pore structures. Selection focuses on benches with coherent banding for vein-cut orders and calm movement for cross-cut tiles. Close coordination with quarry partners protects continuity of look across phases of a project. Responsible practices, like controlled water use and orderly bench rehabilitation, support long-term viability. This upstream control lets design teams specify appearance parameters with confidence and maintain them through approvals, mockups, and the final installation across linked spaces.
Professional packing protects edges and finishes from yard to site. Slabs travel upright on A-frames with foam interlayers, corner guards, and moisture-resistant wrap; tiles are packed flat in fumigated wooden crates. Barcode labels show product code, batch, finish, thickness, and net area. Container loading balances weight and footprint to limit breakage. Shock indicators and desiccants are available for sensitive routes. As an exporter of Walnut Travertine, JAM Stone Co. optimizes crate layouts to lower freight per square meter and to deliver intact, ready-to-install material on predictable timelines.
also known as tree trunk travertine, is a distinctive type of travertine that stands out due to its unique color and design. It is available in both wavy (vein cut) and waveless (cross cut) forms, and can be processed into various tile and slab dimensions.
Due to its warm aesthetic, Walnut Travertine is likely popular in countries with a strong construction industry and a preference for natural stone finishes. This could include the United States, China, wealthy countries in the Middle East, and across Europe. While specific import data can be difficult to find, major importers like the US often source their Walnut Travertine from Turkey and Iran.
Address: No. 1014, JAM Center, Jamaran St., Niavaran, Tehran, Iran – 1977763988
Email: info@jamstoneco.com
