Menu
Persian Lago Marble is a light beige marble with delicate honey-gold veins that flow calmly across each slab. When polished, the stone reflects soft light and gives floors, walls and counters a gentle yet rich look. Its neutral cream base works with warm or cool accents, and the even background makes it easy to book-match patterns that resemble large artworks. Because it mixes elegance, flexibility and timeless colour, Persian Lago Marble is chosen for many high-end interior projects worldwide.
On every project, a reliable partner is as important as fine stone. JAM Stone Co, a long-standing Supplier of Persian Lago Marble, controls the process from the quarry to the packed crate. Blocks come from company-managed pits, then move through modern gang-saws, vacuum-resin lines and 16-head polishers that give each slab a clear sheen. Technicians inspect colour, flatness and gloss at 3 checkpoints, and moisture wrap plus foam spacers keep breakage under 2 %. This controlled chain lets architects order with full confidence in quality and schedule.
Persian Lago Marble is a metamorphic rock that began as limestone and changed under heat and pressure deep inside the earth. It now contains more than 95 % calcite, a mineral that gives the stone low water absorption and soft colour. Thin iron-oxide streaks create caramel veins that move smoothly without sharp contrast. Quarry workers cut blocks up to 2.6 m long and up to 1.8 m high, which factories slice into slabs of 20 mm or 30 mm thickness. The limited Iranian deposit makes the stone exclusive and adds prestige.
Even though it looks delicate, Persian Lago Marble has solid technical values for interior use. Bulk density is about 2.65 g cm⁻³, and open porosity stays below 0.6 %. Compressive strength ranges from 120 MPa to 145 MPa, while flexural strength after resin reaches 15 MPa to 18 MPa. With a Mohs hardness above 3, the stone handles normal foot traffic yet can still be cut with common marble tools. These numbers show that the stone’s beauty is backed by dependable performance.
Persian Lago Marble is composed of more than 95 % micro-crystalline calcite with traces of dolomite and iron oxide. The calcite matrix is tight and uniform, giving the stone its cream tone while the oxide inclusions form the soft caramel veins. Overall porosity remains under 0.6 %, supporting good polish and stain resistance.
The background moves from light beige to creamy ivory, consistent across most slabs. Honey and caramel veins appear as winding ribbons, of medium density and small width, that can be mirrored to create symmetrical designs. Subtle tonal shifts inside each vein add depth without creating strong contrast or disruptive blotches.
Laboratory tests set bulk density at 2.63 – 2.68 g cm⁻³, with water absorption between 0.25 % and 0.35 %. Closed pores dominate the structure, so liquids cannot penetrate quickly. Low porosity also means the stone takes a very high polish and keeps that gloss level in heavy foot-traffic zones.
On the Mohs scale, Persian Lago Marble measures 3 – 3.5, which allows precise machining but still resists daily abrasion. Compressive strength ranges from 120 MPa to 145 MPa, and resin-treated flexural strength sits between 15 MPa and 18 MPa. These numbers confirm safe use for floors, stairs and large wall panels.
Premium blocks show very few natural defects: fissures are under 0.3 mm and are sealed with transparent resin; clay seams and stylolites occur rarely and are removed during trimming. Surface pitting is minimal, giving installers a smooth face that needs little filler and cuts waste on high-precision joinery jobs.
A high-gloss polish above 90 GU makes Persian Lago Marble bounce light softly and brighten rooms without glare. In honed or brushed finishes, the beige tone stays warm and the surface feels satin-smooth to the hand. Indoor colour change is minimal; lab tests record a ΔE shift under 1 after 1 000 h of intense light. Outdoors, the stone must be sealed and shielded from heavy frost, yet it performs well in mild climates. Because it is mostly calcium carbonate, prompt cleaning of acidic spills is essential.
As mentioned previously, high-gloss polishing pushes gloss above 90 GU, giving floors a soft mirror that spreads ambient light without glare. Honed or brushed textures reduce reflection yet keep the warm cream tone. Designers often book-match slabs to form flowing patterns that read like abstract paintings across tall feature walls.
A polished face is glass-smooth and cool to the touch, while a honed finish feels like satin under fingertips. Brushed treatment opens micro pits that add gentle traction without roughness. These options let specifiers balance slip resistance, tactile comfort and aesthetic mood within the same colour family.
Indoor colour change is negligible; accelerated UV testing shows ΔE below 1 after 1 000 h. When sealed the marble resists mild freeze-thaw cycles, making it safe for covered terraces in temperate climates. Outdoor areas must avoid de-icing salts and include expansion joints, so panels move without cracking.
Made of more than 95 % calcium carbonate, Persian Lago Marble etches within seconds if exposed to lemon juice, wine or vinegar. A penetrating sealer forms an invisible barrier that slows absorption and gives owners enough time to wipe spills. Reapplication every 12 – 24 months preserves this defence.
Factories cut Persian Lago Marble into many forms so 1 material can cover an entire scheme. Standard slabs in 20 mm or 30 mm thickness reach up to 3000 × 1800 mm, creating seamless wall panels. In flooring, modules of 300 × 300 mm, 300 × 600 mm and 600 × 600 mm balance pattern and installation time. CNC machines also deliver stair treads, curved skirtings, vanity blanks and water-jet inlays with tolerances within ±0.5 mm. Mesh-back mosaics and brushed 30 mm pavers add fine detail for accents indoors and beneath sheltered terraces.
Standard slabs come in 20 mm and 30 mm thicknesses with maximum dimensions around 3 000 × 1 800 mm. Large size means fewer joints on walls and counters, and the generous height lets installers center the best vein patterns. All slabs are resin-backed and polished, ready for on-site cutting or direct fixing.
Factory-cut tiles cover common module sizes such as 300 × 300 mm, 300 × 600 mm and 600 × 600 mm. Thickness is usually 10 mm or 12 mm, making the pieces light enough for rapid wall installation, while a thickness of around 15 to 20 mm is recommended for floors. Chamfered edges and calibrated backs allow tight grout lines and true, level surfaces.
Custom pieces for stairs, vanity tops, window sills or curved cladding are produced on CNC bridge saws and water-jet tables. Tolerances stay within ±0.5 mm even on long stringers, so joints close neatly. Contractors can order pre-cut sink openings or edge profiles, saving on-site labour and reducing waste.
Mesh-mounted mosaics in 25 × 25 mm cubes, linear strips or arabesque shapes bring fine texture to shower floors and feature walls. Sheets measure 300 × 300 mm for easy alignment and can bend slightly to follow curved surfaces. The small tile size increases slip resistance while keeping the overall cream-gold aesthetic consistent.
For covered patios or loggias, brushed pavers in 30 mm thickness offer pleasant underfoot grip and withstand outdoor humidity. Slightly eased edges avoid chipping, and a factory-applied water repellent slows moss growth. Although not advised for regions with heavy frost or vehicular loads, these pavers suit Mediterranean or subtropical climates with minimal maintenance.
Matching skirting in 100 mm heights finishes wall-floor transitions with a subtle bevel that hides minor slab tolerances. Lengths up to 2 400 mm cut visual joints and speed fixing. Factory polishing on both face and top edge removes on-site grinding, meaning less dust and faster turnaround on commercial fit-outs.
Quarry extraction yields blocks about 2.6 × 1.5 × 1.3 m that weigh 6 t to 10 t. Each block is sprayed to control dust, tagged for traceability and wrapped in plastic film before transport. Consistent colour across sequential layers eases slab matching, while compact dimensions fit standard container frames for economical shipping.
With its calm colour and clean face, Persian Lago Marble enhances hotel lobbies, shopping-mall floors, private villas and luxury bathrooms. Large book-matched wall panels create flowing wave patterns behind reception desks or as living-room focal points. Kitchen islands in 30 mm slabs show crisp veins and withstand daily wear. Fire surrounds, columns and reception counters gain understated luxury without visual weight. Covered terraces stay bright when installers use breathable sealers and movement joints suited to local climate.
Price for Persian Lago Marble does not follow a single list but responds to several interlocking factors. Grade and block size set the starting point, while processing quality, chosen finish and requested thickness add or remove small increments. International buyers also face currency swings and freight surcharges that can alter delivered cost by around 15 %. Because these drivers interact, professionals compare full installed square-metre rates, not just slab invoices, and they book production slots early to lock in the most stable terms.
Premium A grade shows a clean cream background with thin, harmonised veins, so yield loss is low and visual impact is high. Lower grades may have cloudy patches or misaligned veins, forcing installers to cut around defects, which increases waste and raises installation time and overall cost even if block price is lower.
Large, crack-free blocks produce jumbo slabs that let designers span big walls without joints. Although such blocks cost more per tonne, they reduce cutting waste and labour hours, so the final installed square-metre rate often ends lower than small-block alternatives that demand extra seaming, trimming and corrections.
Vacuum resin treatment, full-face UV curing and progressive polishing through 16 heads raise factory costs by roughly 10 %. However, that investment improves surface gloss, edge integrity and long-term durability, sparing clients later patch repairs. High processing quality also means faster site installation because the slabs need minimal dressing.
Polished surfaces reflect light and require fine abrasive steps, adding extra machine time; brushed or honed finishes skip the final pads yet include texturing brushes, so the cost difference stays moderate. Antique or leathered options combine both operations and often attract a boutique mark-up due to smaller batch scheduling.
A 30 mm slab contains 50 % more raw stone than a 20 mm slab, and heavier weight lifts shipping and handling fees. Oversize panels may exceed standard crate dimensions, pushing shippers to use custom frames or open-top containers. Designers should balance thickness and panel span against budget and logistics.
Ocean freight can swing delivered price by ±15 % in volatile markets. Booking full-container loads offers the lowest per-square-metre rate, yet small projects might need groupage shipments at higher unit cost. Seasonal quarry closures for maintenance or extreme heat also influence lead times, so early ordering guards against delays.
Extraction begins with diamond-wire saws that cut neat channels around each block, which is then lowered onto air cushions and sprayed with water to suppress dust. Graders mark colour, vein direction and integrity before transport to the factory, where 80-blade gang-saws slice the blocks into raw slabs. Vacuum resin fills tiny pits, ultraviolet lamps cure the resin and 16-head polishing lines raise gloss. After quality checks, slabs are wrapped in foam, sealed in film, strapped to steel A-frames and loaded by 3-D-planned container layouts that keep breakage below 2 %.
Correct installation sets the foundation for long service life. Use a white, flexible thin-set adhesive and leave grout joints between 2 mm and 3 mm. After curing, apply a breathable impregnating sealer and renew it every 24 months on busy floors or every 12 months outdoors. Clean with pH-neutral stone soap and wipe acidic spills at once to avoid etching. Felt pads under chairs, door mats at entrances and a decoupling membrane over flexible substrates help stop scratches and cracks before they start.
JAM Stone Co. controls Persian Lago Marble from quarry face to packed crate, making the firm a trusted supplier of Persian Lago Marble for architects worldwide. The company holds long-term quarry leases, runs modern gang-saws, water-jet cutters and computer-guided polishers that deliver gloss above 85 GU. In-house labs match colour batches, and slabs maintain thickness within ±0.5 mm. Integrated operations mean clients receive consistent stone, accurate documentation and rapid project scheduling. Regular process audits and ISO 9001 compliance underpin a quality system that tracks each slab from extraction to load-out, supporting dependable supply for complex global builds.
As an experienced exporter of Persian Lago Marble, JAM Stone Co. ships to more than 30 countries across the GCC, Europe and East Asia. Multi-stage inspections cover visual grading, surface flatness and edge integrity, while ISO 9001 and CE certificates prove international conformity. The firm accepts orders from 200 m² to 10000 m² and offers client-specific cutting, surface finishing and colour matching. Dedicated logistics staff arrange consolidated sailings, speedy documentation and insured crating that keep breakage under 2 %.
The quarry lies on Iran’s central plateau, where thick limestone beds transformed into beige marble with stable colour and gentle veining. A consistent partnership with owners ensures continuous access to reserves measuring several million tonnes, so large projects face no shortage. Core drilling and ongoing petrographic tests confirm mineral consistency across benches. Dust-suppression mists, closed-loop water recycling and progressive rehabilitation demonstrate eco-conscious extraction that meets local rules and international sustainability expectations. Strategic proximity to highways and rail links also shortens trucking distance, cutting carbon emissions and transit costs.
As a provider of Persian Lago Marble, JAM Stone Co. shields its product on long voyages using multiple layers of protection. Foam sheets and moisture film separate polished faces, while ISPM-15 timber, steel straps and metal corner guards brace every bundle. Tiles travel in a carton-in-crate system that installers can lift by hand. QR-coded labels link each package to batch data, adding traceability. A 3-D load plan balances weight inside the container, keeping breakage below 2 % even during rough sea legs.
features a beige-cream base with subtle cloudy veining, offering durability and a refined look ideal for walls, floors, and surfaces.
Persian Lago Marble has made a significant impact in international markets, admired by architects, designers, and homeowners around the globe. Its versatile aesthetic allows it to fit seamlessly into various design styles, making it a popular choice for upscale residential projects, commercial spaces, and luxury hotels. As the demand for natural stone continues to rise, Persian Lago Marble stands out for its elegance, durability, and unique beauty, solidifying its place as a preferred material in high-end design.
Address: No. 1014, JAM Center, Jamaran St., Niavaran, Tehran, Iran – 1977763988
Email: info@jamstoneco.com
