Menu
Mango Onyx introduces a warm, glowing look to interior spaces, with tones that range from honey yellow to deep mango orange. Quarried in Iran and processed for premium interiors, this calcite onyx is valued for its translucency, which makes backlit features possible. The stone accepts a high polish and displays distinct bands or clouds that read clearly from a distance. Color and pattern vary by block, so careful selection and matching are important for large areas. If you are planning a feature wall, reception desk, or vanity with strong visual impact, let’s explore why this stone deserves close attention.
When quality matters, the choice of partner shapes both the look and the outcome. JAM Stone Co. sources Mango Onyx from trusted Iranian quarries and manages the full chain from block selection to finished goods. Advanced cutting, vacuum resin lines, mesh reinforcement, and calibrated polishing help produce flat, stable slabs and tiles. The team follows export standards, documents quality checks, and packs orders with corner guards, moisture wrap, and sturdy wooden crates. This end-to-end approach supports reliable deliveries for projects and stock orders alike, so clients receive consistent material ready for installation.
Mango Onyx (called occasionally Amber onyx) is a decorative carbonate stone made mainly of calcite. It is not silica onyx, even though the trade name is similar. Typical colors include yellow, amber, and orange with white or caramel bands that form from mineral changes over time. The stone is translucent, so thin panels can glow when light is placed behind them. It suits interior walls, vanities, furniture, and backlit features. As with other calcite stones, it is sensitive to acids and scratching, so it needs protection in heavy-use zones such as kitchen counters and a maintenance plan that fits the space.
Although Mango Onyx polishes to a mirror finish, it behaves more like marble than granite in daily use. It has a bulk density ≈ 2.65 g/cm³, a water absorption rate around < 0.6% (by weight), a compressive strength that is equivalent of ≈ 80–110 MPa, and a flexural strength of 10 to 15 MPa, which makes it a good option for interior cladding. Since flexural strength is considered modest, large panels benefit from mesh backing and proper support. Slabs are often resin-filled to stabilize micro-pits and fine veins. Installers should follow movement-joint rules and confirm spans for shelves or countertops. Because block tone and vein structure vary, shop drawings and dry-lay reviews help align expectations and reduce waste before cutting bookmatched sets or large cut-to-size elements.
Mango Onyx is calcite-dominant (CaCO₃). Iron oxides and other minor minerals create honey and orange tones, while white bands mark changes in deposition. Porosity is usually low in the body but can rise along veins. Resin treatment fills micro-voids and helps deliver a continuous, high-gloss face across each slab.
Base tones span soft yellow to saturated mango orange with white or cream bands. Patterns vary from cloudy swirls to straighter layers. Bookmatching produces strong symmetry in feature walls and reception fronts. Because benches differ, confirm color intensity and vein continuity during selection, especially when the design relies on repeating panels.
The matrix is dense and supports a bright polish. Localized pores may appear at transitions between bands. These are usually filled during factory resin treatment. Water absorption is typically under 0.6% by weight. A penetrating sealer reduces liquid uptake at the surface and helps prevent darkening in wet or spill-prone areas.
With Mohs hardness around 3, Mango Onyx can scratch under abrasive contact. Compressive strength suits interior walls; however, in terms of usage for flooring, select residential floors only in very low-traffic, protected areas since abrasion resistance is significantly lower than granite. Flexural capacity is lower than granites, so installers should use mesh-backed slabs, verified support spans, and careful handling to prevent edge damage or bowing in large formats.
Natural features may include healed fissures, clay seams, and stylolites. These are controlled at grading and often stabilized with resin and mesh. Select higher grades for uniform color and fewer discontinuities in statement pieces. On site, protect edges and corners, and avoid dragging tools or hardware across polished faces during fitting.
Mango Onyx delivers high visual impact because light travels through the stone. Backlighting reveals depth in the bands and enriches the warm color. A polished finish gives a mirror effect, while a honed surface softens reflections without losing tone. Indoors, color stays steady under common lighting. As a carbonate, the stone is acid-sensitive, so lemon, vinegar, or wine can etch the surface. Plan ventilation behind lit panels to control heat. In all cases, pair sound detailing with a simple care routine to keep the surface bright and readable across the life of the project.
Backlit panels produce a gentle glow across honey and orange layers. Polished faces reflect light cleanly, which suits lobbies and bars. Honed finishes reduce glare but keep color strong. Brushed textures add tactile interest for accents. Bookmatched pairs create focus walls that read clearly from the main viewpoint without busy visual noise.
The stone feels smooth and cool in the hand. Factory resin minimizes micro-pitting and supports even reflection. Honed or brushed finishes give slight grip at edges on vanities and furniture. These textures are useful where users touch the stone often, as they lower the slick feeling that sometimes comes with high-gloss surfaces.
Mango Onyx is intended for interiors. Freeze–thaw cycles, acid rain, and prolonged UV can reduce polish or shift tone outdoors. In kitchens or bars, acidic spills may etch. Outdoor use is not recommended; Still, if used, take advantage of mats and coasters, wipe promptly, and plan service tops or glass overlays in heavy-use zones. In showers, select neutral cleaners and renew sealers as needed.
Calcite reacts with acids, including many household liquids. A penetrating sealer lowers stain risk but does not block etching. Stick to pH-neutral cleaners and avoid bleach or harsh alkalis. For light marks, professional polishing can restore clarity. Plan cut-outs and edges with extra sealing, as these areas take the most exposure over time.
Mango Onyx is supplied in formats that support bold feature walls and precise interior cladding across homes, hotels, and retail spaces. Reinforced slabs offer the best canvas for backlit statements and bookmatched layouts. Calibrated tiles simplify alignment over flat substrates. Custom cut-to-size pieces create portals and reception fronts. Mosaics resolve curves and accents. Exterior pavers are not recommended due to chemical sensitivity. Skirting completes wall runs cleanly. Blocks are graded for color and vein integrity so production can match the approved visual target while keeping yield and logistics efficient from quarry to crate.
Reinforced slabs are the core format for signature elements. Typical dimensions run 240–280 × 120–180 cm in 20 or 30 mm thickness. Resin and mesh stabilization help control veining and improve yield. Confirm bow tolerance, handling paths, and realistic spans before shop drawings. For backlit panels, plan cavities, ventilation, and safe access for maintenance.
Calibrated tiles commonly come in 300×600, 600×600, and 600×1200 mm at 15–20 mm thick. They suit interior walls and low-traffic residential floors over flat, stable substrates. Keep grout joints at roughly 1.5–3 mm, pre-seal faces and cut edges, and use pH-neutral cleaners. Follow movement-joint standards to manage thermal and structural shifts within each room.
Custom modules deliver consistent joints on portals, counters, and desk fronts. Approve shop drawings that fix module sizes, joint layout, and edge profiles. Select blocks for vein continuity across adjacent pieces, then specify reinforcement where spans or openings require support. Coordinate crate limits, elevator sizes, and site access so logistics do not force design changes.
Mesh-mounted mosaics in 20×20, 25×25, or 50×50 mm sheets add detail to niches, feature bands, and curved surfaces. Their small units help maintain pattern flow around corners and radii. Pre-seal before grouting to reduce staining. Use neutral cleaners in wet areas, and ensure solid backing to avoid telegraphing of voids through translucent pieces.
As mentioned previously, exterior pavers are not recommended for Mango Onyx. The calcite body is acid-sensitive and vulnerable to freeze–thaw cycling and UV exposure. Even sheltered outdoor use is high-risk due to acid sensitivity, UV, and weathering.
Skirting typically ranges from 80–120 mm high in 20 mm thickness to match tile systems. Factory profiling and pre-sealing speed clean installation and protect edges. Mitred internal and external corners improve continuity along walls and columns. Coordinate heights with door frames and electrical points, and confirm expansion gaps behind long linear runs.
Blocks are selected for color consistency and vein integrity to support bookmatching and large facing modules. Typical weights are roughly 5–12 tons with variable dimensions by bench. Straighter, taller blocks increase slab yield and reduce waste. Each block is trimmed, sealed, and labeled for traceability through sawing, finishing, packing, and delivery scheduling.
Mango Onyx suits interior feature elements where light and color can be appreciated. Backlit walls, reception desks, and bar fronts show the stone at its best. Vanities, shower surrounds, and fireplace faces also perform well when sealed and cleaned with neutral agents. Residential floors may be considered only in very low-traffic, protected zones with strict maintenance and mats. For kitchen worktops or busy bars, plan protective measures such as service tops, trays, and clear overlays. In all cases, coordinate movement joints, ventilation for lit assemblies, and access panels for maintenance.
Prices depend on the stone’s grade, the block and slab yield, processing steps, chosen finish, thickness and size, and the logistics plan. Clean, saturated orange blocks with stable banding sit in higher bands. Mesh-backed slabs, full resin cycles, and fine-grit polishing add cost but increase consistency. Oversized panels require more handling and packing care. Freight, crate density, and port-to-site conditions shape the final landed cost. Discuss the scope early, confirm the mix of sizes, and allow time for selection to control waste and keep the budget aligned with the visual target.
Higher grades feature steady mango tone, crisp bands, and limited repairs. Lower grades may show varied color, open veins, or larger filled areas. Grade choice affects both look and yield. Agree on an acceptable range of features and select from the same batch to keep the installation visually consistent from panel to panel.
Taller, wider, and straighter blocks produce more full-size slabs and fewer offcuts. Consistent benches support bookmatched sets and large modules. Shorter or irregular blocks reduce yield and push costs upward per square meter. Early access to block photos and slab lists helps planners set realistic module sizes and manage waste.
Multi-stage resin, vacuum cycles, mesh reinforcement, tight calibration, and high-grit polishing raise factory costs but reduce problems on site. Flatter slabs speed installation and improve joints. Better processing also supports backlighting by limiting cloudy patches. Confirm factory specs, gloss targets, and tolerances so expectations match the delivered material.
Polished finishes demand more passes and finer abrasives. Honed or brushed surfaces usually take fewer steps, but they may need extra sealing in wet areas. Specialty textures and edge profiles add time and checks. Select the finish during samples and mock-ups, then maintain the same setting across the job to avoid visible changes between zones.
Thicker sections and oversized panels cost more due to material, handling, and packing requirements. Thin tiles may reduce material cost, yet they need flat, stable substrates and careful crate design. Balance structural needs, visual goals, and transport constraints when choosing thickness and size, especially for backlit assemblies and tall cladding modules.
Quarry season, bench access, and distance to port affect lead times. Crate layout, moisture protection, and container optimization shape freight costs. Inland shipping conditions and site access also matter. Share schedule targets and site limits early, so packing choices and delivery methods align with crane capacity, storage, and installation flow.
Extraction starts with selective benching to secure color and vein integrity. Blocks are trimmed, faces are sealed, and each block is graded by tone and structure. After primary sawing, slabs are dried and treated with resin, often under vacuum, then backed with mesh where veins require support. Polishing follows with calibrated passes to achieve an even thickness and a clear, bright face. Slabs and tiles then move to inspection for flatness, gloss, and edge quality so the batch remains consistent.
Before packing, each slab receives an ID that links it to its block for traceability. Corners get protection, surfaces are wrapped against moisture, and crates are built from certified wood. Labels state the product, thickness, and batch for easy checks on arrival. Containers are loaded to limit movement and support weight evenly. For cut-to-size projects, pieces are grouped by elevation or sequence to reduce handling on site. This controlled chain helps keep the material safe from quarry to installation.
Use white, flexible adhesives that suit the substrate, and keep grout joints around 1.5–3 mm for calibrated tiles and panels. Seal exposed faces and cut edges before and after grouting to lower stain risk. Clean with pH-neutral agents and soft cloths. Avoid acids, bleach, harsh alkalis, and abrasive powders or pads.. Fit mats at entries, use felt pads under furniture, and place trays or coasters under bottles and glasses. For backlit assemblies, allow airflow behind panels and keep heat sources at safe distances to prevent stress, color shift, or adhesive failure over the life of the system.
Plan a sealing cycle based on use: lighter residential zones may need annual checks, while busy bars or vanities may need shorter intervals. Wipe spills promptly, especially citrus, vinegar, and wine. For small etch marks, a trained technician can re-polish the area. In showers, select neutral cleaners, maintain silicone joints at corners, and renew sealers as recommended. When cutting or drilling on site, re-seal fresh edges. These simple steps protect gloss, keep color clear, and help the installation age well with regular, low-effort care.
JAM Stone Co. manages Mango Onyx from quarry selection to finished formats with documented checks at each stage. Multi-wire sawing, controlled drying, vacuum resin cycles, and mesh reinforcement support stable, flat slabs ready for backlighting. Calibration and high-grit polishing deliver even thickness and gloss across batches. As an experienced exporter of Mango Onyx, the company aligns quarry output with project needs, including bookmatched sets and cut-to-size packages. Technical teams share advice on module sizing, joint layout, and lighting cavities so design goals, structural limits, and installation methods work together on site.
End-to-end control helps JAM Stone Co. deliver consistent color and vein structure across orders. Each batch passes visual grading, thickness and flatness checks, and edge inspection before packing. Documentation accompanies every crate for easy verification at delivery. As a trusted supplier of Mango Onyx, the company supports both project orders and distributor stocks, offering clear photos, slab lists, and shop-drawing reviews when needed. This practical support reduces waste during cutting and helps installers keep tight joints and clean edges, especially on large feature walls and reception desks.
The company works with long-term partners in key Iranian onyx regions to secure steady benches with recognizable honey-to-mango tones. Close coordination at the quarry improves block yield, supports bookmatching, and shortens selection time. Blocks are trimmed and sealed for safe transport to the factory. As a seasoned exporter of Mango Onyx, JAM Stone Co. balances quarry output with production schedules to keep lead times predictable. Clients receive reliable updates on block availability, color ranges, and veining so they can approve selections that match the project’s visual target and technical plan.
Packing follows international standards designed for stone. Slabs receive corner guards, moisture-resistant films, and face-to-face separators. Crates are built from treated wood, braced to resist movement, and labeled with product codes, thickness, and batch numbers. Tiles and cut-to-size pieces are sorted by sequence, then wrapped and cushioned to protect edges. As a dependable provider of Mango Onyx, JAM Stone Co. optimizes crate density for safe loading, adds shock absorbers where needed, and plans container layouts that suit the site’s handling limits. This care reduces breakage risk and supports smooth, timely installation.
is a captivating natural stone known for its rich shades of sunset-like yellows, warm oranges, and subtle white veining.
Mango Onyx enjoys a strong presence in international markets, with North America leading in demand. Although North America dominates the demand for Mango Onyx, its appeal is growing in Europe, Asia, and the Middle East as luxury markets expand. With its combination of beauty and functionality, Mango Onyx is cementing its status as a timeless material adored worldwide.
Address: No. 1014, JAM Center, Jamaran St., Niavaran, Tehran, Iran – 1977763988
Email: info@jamstoneco.com
