Menu
Lilac Statuario Marble pairs a clean white background with lilac to violet veining that ranges from fine threads to bolder ribbons. The look is crisp and architectural, especially when slabs are bookmatched to mirror the pattern. Finish choice guides the mood and glare level: polished gives sharp contrast, honed softens reflection, and leathered adds a tactile feel. Indoors, it suits feature walls, vanities, reception desks, shower surrounds, and medium-traffic floors. Because it is a calcite-rich marble, liquids with acid can etch the surface; a realistic care plan with pH-neutral cleaning and scheduled sealing helps the face stay fresh over time.
Reliable supply matters as much as design intent. JAM Stone Co. checks grading, thickness calibration, flatness, and precise edges so panels install cleanly and on schedule. As a supplier of Lilac Statuario Marble, the team matches finish to use case and prepares layout sheets for bookmatching. As an exporter of Lilac Statuario Marble, they manage crating, moisture protection, and container planning with clear crate maps and batch photos. The company also offers responsive logistics, flexible MOQs (minimum order quantities), and documentation packs, helping architects and contractors reduce risk from specification through delivery.
Lilac Statuario Marble is a calcite-based metamorphic stone known for a bright white field crossed by lilac to violet veins. The look is high-contrast and clean, similar in spirit to classic Statuario styles, yet defined by its purple vein palette. It accepts polished, honed, and leathered finishes, which change glare and hand-feel. Typical uses include interior walls, vanities, counters with careful care, shower surrounds, stair cladding, and medium-traffic floors. Because it is rich in calcium carbonate, weak acids can etch the face, so projects should pair a pH-neutral cleaning plan with scheduled sealing and quick spill response.
Lilac Statuario Marble is a calcite-dominant stone with fine to medium crystals that give good cohesion for interior cladding and medium-duty floors. Typical bulk density is 2.68–2.72 g/cm³, with open porosity near 0.3–1.5% and water absorption around 0.10–0.35% by weight. Mechanical values reflect a marble at Mohs ~3, compressive strength near 80–130 MPa, and flexural strength about 10–18 MPa (typical ranges for calcite marbles tested to ASTM C97/C170/C880 or EN 1936/1926/12372). Vein orientation affects performance and cutting strategy, so dry-lay review and clear grain direction notes help reduce risk. Large formats benefit from back-mesh and medium-bed mortars. QC should check thickness, flatness, and edge integrity, and define allowable fissures and fill color.
This stone is calcite-dominant, typically >95% CaCO₃, with minor accessory minerals in the veins. Dolomite is usually low. Lilac coloration often relates to manganese and iron oxides or hydroxides along healed fissures. Open porosity generally falls around 0.3–1.5%, which supports indoor use with sensible sealing. Vein density and micro-fissures vary by block and bench.
The base spans cool, crisp white to slightly blue-white. Veins range from fine lilac threads to bold purple ribbons, appearing linear, branched, or web-like. Density varies from quiet to dramatic, making it suitable for both calm fields and statement panels. Pattern regularity depends on cut; many blocks allow striking bookmatched layouts with mirrored flow.
Bulk density commonly measures 2.68–2.72 g/cm³. Water absorption by weight is often ~0.10–0.35%, which aligns with careful bathroom and vanity use. Pore structure (open vs. closed) matters for sealer choice: open systems take sealer more readily but need periodic renewal. Lower absorption lots show slower stain uptake and improved maintenance intervals indoors.
Mohs hardness is ~3, which means common quartz dust can scratch; use mats and smart cleaning. Compressive strength often falls near 80–130 MPa, and flexural strength about 10–18 MPa, depending on cut and vein orientation. Large panels benefit from back-reinforcement and medium-bed adhesives to reduce stress concentrations during installation and service.
Natural features can include clay seams, stylolites, sugar spots, pinholes, and hairline fissures. Factory resin and selective filling stabilize micro-pits before finishing. Project documents should define allowable fissure width/length, color-match expectations for fills, and edge chipping limits. Pre-delivery dry-lay photos help verify quality, tone uniformity, and vein continuity across adjacent pieces.
Polished Lilac Statuario Marble shows crisp contrast and bright gloss, often ~85 GU at 60° geometry, honed lowers glare and smooths the pattern, while leathered adds gentle grip and soft shadow along the veins. Thin pieces show slight translucency, but slabs read opaque. Indoors, color is stable under normal UV. The surface can etch with weak acids such as wine or lemon juice, so plan a pH-neutral cleaning routine and quick spill response. Penetrating sealers limit stains but do not stop etching; re-seal on a 6–12 month cycle based on use and traffic. Professional re-hone restores clarity when needed.
In thin sections the stone shows modest translucency; as slabs, it reads opaque with strong graphic contrast. Polished finishes often exceed ~85 GU (60°), giving a crisp, reflective face. Honed lowers glare and smooths contrast. Brushed or leathered finishes mute reflection, deepen vein shadows, and emphasize texture while gently reducing the visibility of small surface pits.
Polished is smooth and cool to the touch, ideal for verticals and low-wear tops. Honed feels silky with low sheen. Leathered introduces fine micro-topography, adding subtle grip and tactile interest. Minor micro-pitting can appear on textured faces; set acceptance thresholds in submittals. Correct calibration preserves an even touch across tiles and large-format panels.
Indoors, color remains stable under normal UV exposure. Freeze–thaw is not a concern inside; outdoors it requires strict detailing and conservative placement. The stone is sensitive to weak acids such as wine or lemon, which can etch polish or dull a honed face. Traffic abrasion gradually softens gloss; periodic professional re-hone or re-polish restores clarity.
With CaCO₃ typically >95%, the surface reacts with weak household acids, producing etch marks rather than deep stains. Penetrating sealers help reduce stain uptake but cannot stop etching. Use pH-neutral cleaners and soft pads; avoid vinegar, citrus agents, and bleach. Plan resealing on a 6–12-month cycle depending on use, traffic, and cleaning frequency.
Standard slabs are produced in 2 cm and 3 cm thickness, typically 250–320 × 140–200 cm, with resin and optional back-mesh for stability and safe handling. Tiles are commonly 300×600, 600×600, and 600×1200 mm with calibrated thickness and eased or micro-beveled edges. Cut-to-size panels for walls, showers, stairs, and desks are routine; confirm crate, lift, and site access limits early. Mosaics arrive mesh-mounted; verify adhesive compatibility for wet areas. Exterior pavers are generally avoided; if required, use thicker, non-polished pieces. Skirting is typically 80–120 mm high. Blocks often range ~2–10 t (metric tons) and are selected for white field and vein continuity.
Standard thicknesses are 2 cm and 3 cm. Typical dimensions range around 250–320 × 140–200 cm, depending on block size and benching. Resin and back-mesh are applied as needed for stability. Pair slabs for bookmatching during the block selection phase. Flatness, gloss, and thickness calibration are checked to support tight joints and clean reflections.
Common calibrated formats include 300×600 mm, 600×600 mm, and 600×1200 mm, with thickness aligned to project needs. Edges can be sawn, eased, or micro-beveled to reduce chipping. Larger tiles require very flat substrates and tight tolerances. Color-matched grout joints of ~2–3 mm maintain alignment while limiting visual breaks across veined patterns in field areas.
Custom panels for reception walls, shower enclosures, stair treads/risers, and desk fronts are routine. Confirm maximum lengths and widths against crate, elevator, and site access limits. For ambitious spans, specify back-reinforcement, kerfs, or concealed frames. Factory waterjet and CNC profiling deliver precise edges, miters, and returns that align neatly at corners and terminations.
Mesh-mounted sheets in herringbone, hexagon, chevron, basketweave, and linear strips are available. Verify mesh adhesive compatibility with wet-area mortars. Small-format pieces show rich vein micro-patterns; blend sheets before install to distribute color and movement. Request sample boards that reflect real production, not showroom picks, to match tone and veining on site.
Regular outdoor pavers are generally not advised due to acid sensitivity and wear from grit. If used in covered or low-exposure zones, choose thicker sections, non-polished textures, and conservative de-icing practices. Ensure positive drainage and soft pads under furniture. Periodic maintenance, including gentle scrub cleaning and resealing, extends service life in semi-exterior settings.
Typical heights run ~80–120 mm with consistent thickness and eased or micro-beveled edges for chip control. Profiles can include simple rounds or minimalist square faces. Match baseboards to floor finish for a unified look, or select polished for subtle contrast against honed floors. Pre-cut corners and returns improve alignment and speed up installation.
Quarry blocks usually range about 2–10 t (metric tons), selected for white field quality and stable lilac vein character. Bench mapping helps predict vein flow for vein-cut or cross-cut strategies. Larger, cleaner blocks improve slab yield and bookmatch potential while reducing waste. Producers reject blocks with excessive clay seams or open fissures that could weaken large-format panels.
Lilac Statuario Marble suits interior settings where graphic veining adds focus without overpowering a room. It excels on wall cladding, feature fireplaces, reception desks, shower walls, and vanities. Medium-traffic floors are appropriate when finishes match use: honed or leathered for grip, polished mainly for walls and dry areas. Stair treads and risers are feasible at correct thickness with sound substrate support; the stone is cladding, not structural load-bearing. Kitchen countertops are possible with disciplined care, pH-neutral cleaning, and quick spill response. Exterior use is limited to protected zones with conservative detailing; open paving and pool surrounds are discouraged due to acid sensitivity and abrasion.
Pricing for Lilac Statuario Marble depends on technical and logistical factors rather than a fixed list rate. Key drivers include visual grade, block quality, slab yield, calibration accuracy, surface finish, and panel size. Packaging, crate design, and shipping route also affect the landed cost. Because these elements vary by project, buyers should request a quote with clear specifications, finish schedule, sizes, tolerances, layout needs, delivery terms, and QC requirements. Mock-ups, dry-lay reviews, and bookmatch layout sheets help align expectations early, reducing change orders and unplanned costs downstream.
Stone grade reflects base whiteness, lilac vein elegance, and defect control. Higher grades show bright backgrounds, continuous purple veining, and minimal clay seams or open fissures. Lots with tight color match across slabs reduce blending effort on site. Strong selection and sorting reduce risk, waste, and rework, which can raise or lower the final project cost.
Large, clean blocks improve saw plans, reduce offcut waste, and increase net slab area. Careful quarry mapping allows vein alignment for bookmatching, which raises usable yield. Blocks with fewer fissures or hard seams deliver more stable large formats. Better yield lowers unit costs across cutting, finishing, packing, and installation, even when the raw block price is higher.
Precision calibration, flatness control, and consistent thickness reduce lippage and speed installation. High-clarity polish or uniform hone demands sound resin systems, careful curing, and sharp abrasives. Reliable mesh reinforcement minimizes breakage in handling. Strong QC reduces on-site rejects and touch-ups. Better workmanship often raises factory price but lowers total installed cost through fewer delays and defects.
Finish selection affects processing time, labor, and consumables. Polished surfaces require finer grits and more passes; honed uses fewer steps; leathered or brushed adds texturing stages. Special edges, miters, waterjet cuts, or radius work increase shop time. Finish choice should match the use area and maintenance plan to avoid rework, replacements, and long-term cost growth.
Thicker slabs and oversize panels require more material, slower feeds, and stronger reinforcement, raising processing time. Large pieces need careful handling gear, larger crates, and site access planning. Thin large formats may need mesh or ribs to limit bowing. Right-sizing panels to elevators, stairs, and lifts prevents damage, remake orders, and extra delivery charges.
Distance from quarry and plant to port, container efficiency, and crate weight all shape freight cost. Seasonal shipping congestion and fuel surcharges can move totals. Stock on hand, lead time, and reserve continuity influence pricing certainty. Projects that lock specifications early enable better consolidation, fewer partial loads, and smoother customs clearance, which protects the schedule and budget.
Production begins with careful block selection for bright white fields and stable lilac vein flow. At the quarry, benches are mapped, blocks are trimmed, and soundness is checked before transport to the factory. Sawing uses gang saws or multi-wire systems, followed by resin and optional back-mesh where needed. Slabs are cured, calibrated, and finished—polished, honed, or leathered—then verified for thickness, flatness, gloss, and edge integrity. Dry-lay photos and bookmatch layouts confirm continuity. Packing uses foam sheets, corner guards, moisture barriers, and desiccant packs where needed, inside fumigated wooden crates with barcode labels. Container loading follows a crate map, with batch photos, test reports, and packing lists included for customs and site checks.
Use white, non-staining adhesives compatible with marble; rapid-setting cementitious or approved epoxy systems both work when substrates are flat. Keep grout joints tight at 2–3 mm, preferably fine, unsanded grout to avoid scratching. Seal after install and repeat every 6–12 months based on use. Clean with pH-neutral detergents and soft pads; wipe spills immediately, especially wine, vinegar, and citrus. Avoid bleach, acids, and abrasives. In wet areas, install waterproofing and maintain positive slope to drains. Common pitfalls include dark adhesives causing shadowing, skipping dry-lay (poor vein alignment), wide joints that break pattern flow, and aggressive pads that dull finishes—plan details to prevent each one.
JAM Stone Co manages Lilac Statuario Marble from source to shipment through integrated operations. The company maintains long-term relationships with reputable mine owners in key Iranian stone regions, giving steady access to blocks with bright fields and stable lilac veining. In-house processing uses precision polishing lines, bridge saws, CNC profiling, and waterjet cutting for complex shapes. In-house quality labs verify grading, thickness calibration, gloss, and flatness to deliver batch consistency across lots. Documented inspections and controlled curing help slabs perform as specified. As a supplier of Lilac Statuario Marble, JAM Stone Co. aligns production with drawings, finish schedules, and delivery dates.
JAM Stone Co. supports global procurement with a clear, trackable process. Multi-stage inspections cover visual grading, surface flatness, thickness tolerance, gloss, and edge integrity before packing. Compliance with ISO procedures and CE/DoP documentation (EN 12057/12058) keeps projects aligned with international expectations. The company ships regularly to the GCC, Europe, and East Asia, and offers flexible MOQs for boutique or large builds. Customization support covers client-specific cuts, miters, and waterjet details. Secure crating, crate maps, and tracked logistics keep schedules on track. As an exporter of Lilac Statuario Marble, JAM Stone Co. pairs technical documents with timely dispatch and responsive after-sales care.
JAM Stone Co. secures raw blocks from strategic marble belts in northwest and central Iran, and—where a project specifies—partner quarries in neighboring source regions, where limestone beds yield bright white fields with lilac to violet veins. Bench mapping and test cuts confirm vein flow before extraction, improving bookmatch continuity and yield. Direct access via long-term agreements ensures uninterrupted sourcing and predictable color from batch to batch. Reserves are respected through environmentally careful practices such as water recycling and responsible waste handling. As a provider of Lilac Statuario Marble, JAM Stone Co. links quarry data to factory planning, so slab pairing and thickness targets are set early and met on time.
Finished pieces are protected for travel with foam interlayers, corner protectors, and moisture-resistant wrapping inside fumigated wooden crates or steel A-frames. Packing choice depends on destination and handling method: bulk palletizing for short hauls, individual crating for export. Each crate carries clear labels for product code, dimensions, thickness, finish, and batch number, plus a barcode when required. Container optimization balances weight and fragility to lower shipping costs and reduce breakage. Crate maps, batch photos, and packing lists are shared before dispatch, helping site teams prepare unloading plans and verify deliveries against drawings and cutting schedules.
Lilac Statuario Marble
also known as New York white Marble, hails from Turkey and represents a stunning option for interior decoration projects. This white marble, adorned with delicate veining, offers a timeless elegance that enhances walls, floors, stairs, and kitchen panels with a touch of sophistication.
International Markets
Germany, France, Austria, and the Netherlands stand out as key importers of Lilac Statuario marble. These countries have robust construction industries and a strong demand for high-quality natural stone products, making them prime markets for marble imports.
Address: No. 1014, JAM Center, Jamaran St., Niavaran, Tehran, Iran – 1977763988
Email: info@jamstoneco.com
