Menu
Persian Arabescato Marble sets a calm yet striking tone from the first glance. Quarried in Iran, it presents a clean white or light-grey base crossed by flowing grey veins in arabesque patterns. The stone accepts a high polish, supports dramatic book-matched panels, and performs well in hotels, residences, and retail interiors. Thanks to tight grain and generally sound blocks, slabs finish stable and flat after calibration. When you need an architectural surface that communicates quality without loud colors, this grade fits the brief. It delivers refined contrast, reliable processing results, and a look that stays coherent across large areas.
When quality matters, source and process decide the outcome. Careful block selection, resin treatment, and calibrated polishing are the steps that shape final performance. JAM Stone Co. applies this discipline from quarry vetting to shipment. Blocks are checked for tone, seams, and cut yield; slabs receive controlled resin and mesh reinforcement; finishing is monitored for even gloss. The team follows ISO-style controls, maintains batch consistency, and packs to international standards. Coordinated logistics and responsive after-sales support help projects stay on schedule and within scope.
Persian Arabescato Marble is a calcitic stone from Iran (marketed as Arabescato for its web-like veining), known for a light ground and grey, looping veins. It is cut mainly into gangsaw slabs in 2 or 3 cm thickness and matched tiles for interior use. The tight structure gives a bright polish and clean arrises after calibration. Designers value the contrast between the base and the veins, which reads well on large wall panels and reception counters. When two slabs are mirrored side by side, a technique called book-matching, the veins create a continuous figure that becomes a design feature.
This grade behaves like a disciplined architectural marble. The matrix is fine to medium in grain, so edges machine cleanly and the surface accepts a strong polish. Family-typical properties for calcitic marble include:
Bulk density: 2.65–2.73 g/cm³
Water absorption (by weight): ~0.1–0.6% (low)
Open porosity: ~0.3–1.5%
Compressive strength: typically 90–130 MPa
Flexural strength: typically 12–18 MPa
As with all marbles, hardness is about Mohs 3, so protect it from abrasion and sharp impacts. Indoors, it performs well on floors and walls when installed over a stable substrate. In mild climates, exterior use is possible with thicker sections, secure mechanical anchors, open joints, and a non-polished finish; project-specific technical approval is recommended for freeze-thaw or chemically aggressive environments.
The stone is calcite-dominant, typically above 95% calcium carbonate, with minor graphite or iron traces that tint parts of the veining. Grain size ranges from fine to medium, which helps produce an even shine after polishing. Open porosity is low for marble; resin is used to close micro-pits and stabilize hairline seams found in some blocks.
Background shades run from white to pale grey. Veins appear in medium to dark grey, often looping into arabesque forms that read strongly on large areas. Some lots show warm taupe accents. Vein density varies; higher grades target balanced movement without harsh breaks. Book-matching aligns the flow to create a planned figure across adjacent panels.
Bulk density sits near 2.65–2.73 g/cm³, similar to many premium marbles. Water absorption is low (~0.1–0.6%), which helps the polish hold when properly sealed. The relatively closed matrix limits deep staining compared with more porous limestones, but the surface can still take marks from oils or dyes if left unsealed. Factory resin cycles fill pinholes to improve finish continuity and long-term cleanliness.
With Mohs ~3, the stone resists typical foot traffic but needs protection from grit and metal edges. Compressive strength ~90–130 MPa and flexural ~12–18 MPa suit interior flooring and wall cladding, provided substrate flatness, expansion joints, and movement allowances follow best practice.
Natural seams, stylolites, and tiny pits can occur. Selection grades focus on background purity, vein harmony, and minimal open defects. Professional factories reinforce slabs with resin and back mesh where needed, then calibrate thickness for flatness. Visual grading at the factory sorts pieces into lots so color tone and vein character stay coherent across a project.
The look depends on contrast: a quiet base with active veins. Polished surfaces give crisp highlights; honed reads softer under strong light; leathered adds tactile texture and reduces glare. Under interior lighting, the arabesque pattern becomes a focal point even from a distance. As a calcite stone, it reacts to acids, so sealing and neutral cleaners are essential. Outdoors, avoid mirror-polished faces; choose honed or textured finishes and specify proper anchoring, especially in freeze-thaw zones.
The bold yet orderly web of grey lines creates visual interest without heavy color. Large lobby walls, stair halls, and reception desks benefit from this movement. Book-matched pairs can frame entries like artwork. On floors, the pattern reads calmer; on verticals, it becomes a key part of the composition, especially with directed lighting.
Polished slabs feel smooth and cool, with high reflectivity that emphasizes vein edges. Honed reduces sheen for a quieter tone in bright rooms. Leathered or brushed finishes introduce soft relief, improving grip for select areas while maintaining the stone’s character. Resin filling is flush, so surfaces remain even after finishing.
Indoors, color stays stable and polish holds with routine care. For exterior use, specify thicker panels, mechanical fixing, and finishes that reduce slip and glare. Avoid acid exposure from cleaners, polluted rain, or de-icing salts. In cold climates, manage water ingress with back-ventilated façades, open joints, and proper drips to prevent freeze-thaw stresses.
Calcium carbonate reacts with acids, so etching can occur from lemon juice, vinegar, or strong bathroom cleaners. Use pH-neutral products and renew sealer on schedule to limit staining and dull spots. Where food or cosmetics are used, apply mats and wipe spills quickly. If etching appears, a professional re-hone or polish can restore gloss.
Production focuses on gangsaw slabs in 2 cm and 3 cm thicknesses, with matched tiles for floors and walls. Healthy blocks allow jumbo slabs for feature cladding, while tighter blocks suit standard slabs and modular tiles. Cut-to-size pieces—such as stair treads and vanity tops—follow shop drawings. For exterior traffic areas, specify thicker stock with textured finishes. Accessories like skirting and mosaics support visual continuity across a project.
Typical slabs range from about 240–320 cm in length and 140–200 cm in height. After resin cycles and drying, calibration brings thickness to tolerance and improves flatness. Back mesh is applied where needed for handling safety. Jumbo pieces depend on block soundness, vein direction, and the factory’s capacity for careful movement and packing.
Standard formats include 300×600, 600×600, and 600×1200 mm, with thickness generally 10–20 mm. Rectified edges support tight joints; 2–3 mm is common indoors. Tiles are sorted by shade and vein flow during dry layout so each room reads consistently. For wet zones, pick finishes with better grip and seal before grouting.
Stair treads, risers, vanity tops, and wall panels are made per drawings, including edge profiles and drip grooves. Consistent calibration ensures accurate assembly on site. For book-matched wall sets, the factory pre-lays sequences and labels pieces to keep the vein map intact during installation, reducing time and errors during fixing.
Small pieces, such as 10×10, 23×23, or 48×48 mm, are mounted on mesh sheets for quick placement. Because marble is acid-sensitive, seal sheets before grouting and choose a light, marble-safe grout to avoid staining. Mosaics help transition planes, add slip resistance in showers, and repeat the stone’s tone without overwhelming small areas.
For outdoor walkways and terraces, thicker formats, often 30–60 mm, are used with textured faces for traction. Consider load, climate, and base build-up when setting thickness.
Note: marble pavers are feasible but less common than granites; avoid acid/salt exposure and confirm local slip-resistance requirements. Mechanical fixing or well-drained mortar beds reduce the risk of moisture-related movement or edge damage over time.
Skirting pieces, commonly 80–120 mm high and 15–20 mm thick, finish the junction between wall and floor. Matching the batch ensures the same tone and vein style as adjacent tiles. Eased or micro-beveled edges resist chipping. Pre-cut corners and returns speed installation and give a clean, consistent line along corridors and rooms.
Quarry blocks are trimmed for shipping and graded by color, vein regularity, and crack-free mass. Large, sound blocks improve slab yield and enable jumbo sizes. Before purchase, experienced buyers review background purity and plan the cutting direction to balance vein flow and strength. Proper block choice reduces waste and improves cost control.
This marble is chosen for interior floors, wall cladding, bathroom walls, vanity tops, reception desks, and feature panels where vein movement adds character. It suits residential living areas and bedrooms, hotel lobbies, retail backdrops, and corporate reception zones. Kitchen counters are possible with strict sealing and disciplined care against acids. Exterior façades can be specified in mild climates using thicker, mechanically fixed panels with honed or textured finishes; conduct project-specific testing for freeze-thaw and pollutant exposure. In all cases, dry layout and planned sequencing help create a unified visual story across rooms and elevations.
Pricing depends on both the raw block and the factory process. Buyers should consider background purity, vein balance, slab yield, and the level of calibration and polishing. Finish type, thickness, and sizing also influence cost, as do shipping distance and current availability. For large projects, early block reservation and agreed production windows help secure consistent tone and pattern. Clear grading rules, sample approvals, and mock-ups reduce risk and prevent surprise costs once installation begins.
Higher grades show a whiter base with balanced, continuous veins and minimal open features. Lower grades may include busier webs, tiny pits, or more visible seams that need filling. Clear definitions for A/B/C lots keep expectations aligned. Better grades cost more but reduce waste and speed installation through easier matching.
Large, healthy blocks give more full-size slabs and fewer offcuts, lowering unit costs. Blocks with short, broken veins or corner cracks reduce yield and may force smaller panels. Smart buyers confirm cutting direction and expected slab count before purchase. Good yield supports book-matching and consistent sequencing across wide wall areas.
Accurate calibration, even resin work, and well-executed polishing add value by producing flatter, brighter slabs with clean edges. Poor processing shows as lippage, “orange peel” surfaces, or dull spots that slow installation and may need rework. A capable factory delivers steady gloss across batches and labels pieces for easy on-site sorting.
Polished surfaces require more factory time and careful handling; honed is simpler and reads softer in strong light. Leathered or brushed needs extra steps to texture the face while keeping fills flush. Exterior anti-slip treatments add passes and cost. Choose the finish for use, light conditions, and safety needs.
Thicker slabs (30 mm) and jumbo panels increase material and transport costs but improve stiffness and reduce breakage risk. Oversize pieces demand stronger crates and more careful handling. Tiles in standard sizes are more economical, but large rooms often benefit from bigger formats that reduce joints and emphasize the stone’s flowing pattern.
Freight rates, distance to port, and consolidation options affect landed price. Seasonal quarry output and factory schedules influence lead time. Early engagement lets suppliers plan block reservation and line time, avoiding gaps between batches. Well-planned container mixes reduce damage risk and make the most of weight limits without overloading crates.
Extraction begins with geological surveying and selective bench cutting to protect block integrity. After trimming, blocks are graded for tone, vein structure, and soundness. At the factory, slabs are cut on gangsaws, dried thoroughly, and treated with resin cycles to fill micro-pits. Back mesh is applied where needed for safe handling. Calibration sets thickness and improves flatness before the chosen finish, polished, honed, or leathered, is applied and tested for even gloss.
Quality control continues through dry layout, where technicians arrange slabs and tiles to check tone and vein flow. This step guides book-matched sets and room sequences. Edges are beveled, labels added, and protection film applied. Packing uses foam sheets, corner guards, moisture-resistant wrap, and braced wooden crates. Documentation covers piece lists, batch codes, and care guides. Containers are stowed to minimize movement, then routed by sea or road. On arrival, site teams follow the sequence labels for efficient installation.
Choose white, marble-safe thin-set adhesives and keep joints tight; 2–3 mm is typical for rectified tiles. Pre-seal all faces before grouting to prevent pigment uptake, then apply a final seal after cure. In kitchens and baths, place mats under liquids and cosmetics, and use coasters to limit ring marks. Clean with pH-neutral agents; avoid vinegar, citrus, or acid cleaners that can etch the surface. Renew sealer regularly based on use, traffic, and cleaner type.
Plan for movement joints at perimeters and changes of plane, and keep substrates flat to reduce lippage. Protect edges during construction and place felt pads under furniture. In high-traffic areas, choose honed instead of polished to mask micro-scratches. Where etching or dull spots occur, a professional re-hone or polish can restore the finish. Regular dust mopping removes grit that could scratch. With these steps, the stone keeps its crisp look for years.
JAM Stone Co. manages the full chain from block selection to export-ready slabs and tiles. Quarry partners in key Iranian belts supply steady blocks with the right tone and vein style. Inside the plant, automated lines handle gangsaw cutting, resin cycles, mesh backing, and tight calibration. Multi-stage inspections check flatness, gloss, and edge quality before packing. As a trusted supplier of Persian Arabescato Marble, the company aligns batches for tone and vein continuity so designers can plan book-matched walls and coordinated room sets with confidence.
Process control sits at the heart of delivery. Visual grading screens background purity; measurements confirm thickness and squareness; gloss meters test finish quality. Documentation tracks each lot from bench to crate. Export teams prepare compliance files and coordinate shipments to major ports. Flexible MOQs and project-matched cuts help both wholesalers and contractors. With this structure, JAM Stone Co. acts as a dependable exporter of Persian Arabescato Marble, combining stable quality, predictable lead times, and responsive communication throughout production and delivery.
Direct access to proven benches supports regular block flow and better planning for large projects. Geologists and buyers review each bench for vein direction, seam frequency, and color tone before cutting. This early control, plus careful trimming, improves slab yield and reduces waste. Traceability follows each block into the factory and through finishing, so replacements can match if needed. With long-term sourcing and technical oversight, JAM Stone Co. operates as a provider of Persian Arabescato Marble that protects consistency from the quarry face to the final crate.
Packing is engineered for the journey. Slabs receive corner guards, foam interlayers, and moisture-resistant wrap, then load into braced, fumigated wooden crates. Tiles ship in carton sets with shock-absorbing inserts before crating on pallets. Labels list product code, thickness, piece count, and batch references to guide site teams. Container plans balance weight and stability to reduce damage risk. A care sheet travels with each shipment, explaining storage, handling, and first-clean steps so installers can start work with clear, practical guidance.
features a pristine white backdrop intricately adorned with gray and black veining. Bearing striking resemblance to its Italian counterpart, Arabescato Marble, it derives its name from this shared aesthetic. This stone harmonizes effortlessly with a spectrum of hues, complementing white, black, gray, yellow, pink, and blue materials.
Persian Arabescato Marble is exported to numerous countries worldwide, including Australia, Iraq, Canada, Gulf countries, Europe, and Russia.
Address: No. 1014, JAM Center, Jamaran St., Niavaran, Tehran, Iran – 1977763988
Email: info@jamstoneco.com
